Features
- GEN II COMPRESSOR WHEEL AERODYNAMICS
- 76MM COMPRESSOR INDUCER | 120MM COMPRESSOR EXDUCER
- 99MM TURBINE INDUCER | 91MM TURBINE EXDUCER
- 9% INCREASED COMPRESSOR FLOW
- LARGER .88 A/R COMPRESSOR HOUSING VOLUTE
- GTX5020R FEATURES A 120mm COMP EXDUCER ( + 2 mm) AND HAS 30% LOWER INERTIA COMPARED TO GTX5018R
- SUPERCORE AND TURBINE HOUSING SOLD SEPARATELY
- COMPATIBLE WITH GT AND GTX TURBINE HOUSINGS
- 76MM SUPERCORE PN: 851285-5018S
WARNING: Maximum allowable turbocharger speed is 93krpm. The use of this product above max turbocharger speed is at the owner’s risk, and can result in damage and premature failure. To protect the turbocharger from overspeed when operating, a speed sensor can be installed into the compressor housing to monitor shaft speed. Sensors sold separately.
Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration. The horsepower numbers represented above are calculated based strictly on choke flow of the compressor map (total turbo capability), which represents the potential flywheel horsepower.
IMPORTANT PRODUCT INFORMATION
“Garrett Performance Kits are professional aftermarket products only designed for certain racing vehicles driven on particular racing tracks and shall only be used on racing vehicles that will never be driven on public roads or highways. Garrett Performance Kits are not legal for the use in vehicles on public roads or other roads to which public road law applies. Any vehicle modifications using Garrett Performance Kits are AT YOUR OWN RESPONSIBILITY and AT YOUR OWN RISK. Only use Garrett Performance Kits in compliance with all applicable laws, regulations, and ordinances (including but not limited to emission, noise, operating license, performance, safety, and type-approval aspects). A vehicle modification using Garrett Performance Kits may particularly affect or void a vehicle’s warranty, operating license or type-approval. Moreover, only use Garrett Performance Kits in compliance with all applicable racing and racing track provisions. It is YOUR OWN RESPONSIBILITY AND RISK to ensure that your Garrett Performance Kit fits your vehicle and area of application. YOU MUST ENSURE LAWFUL AND SAFE OPERATIONS AT ANY TIME. You should particularly consult the owner’s manual and service manual of your vehicle. You should also contact your vehicle’s manufacturer to determine what effects modifications may have on important aspects such as safety, warranty, performance, etc. Only install and use Garrett Performance Kits if you have fully read and understood this important safety information and if you fully agree with the terms and conditions set forth therein.”
GTX5020R GEN II 76MM
Reference Data
GTX5020R GEN II | Compressor | Turbine | ||||||
---|---|---|---|---|---|---|---|---|
HP: 1075-2050 Â Disp: 2.8L-11.0L | Inducer | Exducer | Trim | A/R | Inducer | Exducer | Trim | |
Supercore | PN | |||||||
851285-5018S | 76mm | 120mm | 41 | 0.88 | 99mm | 91mm | 84 | |
851285-5019S | 80mm | 120mm | 45 | 0.88 | 99mm | 91mm | 84 | |
851285-5020S | 88mm | 120mm | 54 | 0.88 | 99mm | 91mm | 84 | |
Turbine Kits: GTX50 | PN | A/R | Inlet | Outlet | Wastegate | Divided | ||
Interchangeable with GT|GTX 5008 5009 5018 5020 Supercores | 761208-0030 | 0.96 | T6 | V-Band | Free Float | N | ||
761208-0032 | 1.23 | T6 | V-Band | Free Float | N | |||
761208-0033 | 1.39 | T6 | V-Band | Free Float | N |